User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 82 of 134
0 = False
1 = True
Can return the following error codes:
1 = Feature Unsupported!
Large Packet support (Stored)
ATN28: Returns the current value of Large Packet support.
ATN28=n sets Large Packet support to n.
Enumeration values:
0 = False
1 = True
Can return the following error codes:
1 = Feature Unsupported!
Reset TNPP Statistics
ATN22: Runs the Reset TNPP Statistics routine.
TNPP Statistics Table
Name
ATN20[a]: Returns the current value of Name .
Where: a = TNPP Statistics table index (starting from 0).
Count
ATN21[a]: Returns the current value of Count.
Where: a = TNPP Statistics table index (starting from 0).
Datagram Menu
Statistics Table
Name
POCSAG Menu
Preamble Length (Stored)
Length of the preamble sent prior to paging data.
ATN30: Returns the current value of Preamble Length.
ATN30=n.: Sets the value of Preamble Length to n bit, given that 32 <= n <= 2304.
Can return the following error codes:
1 = Value must be an integer multiple of 32.
Function Override (Stored)
Override the function bits in the address codeword. Default (`Message Encoding`) is to set the function bits
based on message encoding: Numeric: 00, Tone: 01, Alpha-numeric: 11.
ATN11: Returns the current value of Function Override.
ATN11=n sets Function Override to n.
Enumeration values:
0 = Message Encoding
1 = Always 00
2 = Always 01
3 = Always 10
4 = Always 11