User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 75 of 134
ATS183: Returns the current value of Tx Range.
Current Tx Freq
ATS184: Returns the current value of Current Tx Freq.
Raster
Read-only node for viewing the raster frequency of the radio.
ATS185: Returns the current value of Raster.
Enumeration values:
0 = 0.001 kHz
1 = 2.500 kHz
2 = 5.000 kHz
3 = 6.250 kHz
4 = 7.500 kHz
5 = 10.000 kHz
6 = 12.500 kHz
7 = 15.000 kHz
8 = 20.000 kHz
9 = 25.000 kHz
10 = 30.000 kHz
Channel Width
Read-only node for viewing the channel width of the radio.
ATS186: Returns the current value of Channel Width.
Enumeration values:
0 = 12.500 KHz
1 = 25.000 KHz
Current Channel (Stored)
Currently selected radio channel number.
ATS54: Returns the current value of Current Channel.
ATS54=n.: Sets the value of Current Channel to n , given that 1 <= n <= 17.
Can return the following error codes:
1 = Exceeds channel count.
2 = Less than current channel.
3 = Cannot change while transmitting.
(Distributer) Channel Count (Stored)
Number of channels that can be switched between using the current channel setting.
ATS210: Returns the current value of Channel Count.
ATS210=n.: Sets the value of Channel Count to n , given that 1 <= n <= 16.
Can return the following error codes:
1 = Exceeds channel count.
2 = Less than current channel.
3 = Cannot change while transmitting.
Advanced Menu
(Distributer) Tx Base Freq
Minimum transmit frequency.
ATS211: Returns the current value of Tx Base Freq.