User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 72 of 134
Initialise the length for a .ruf file transfer
ATU1=n: Runs the RUF Init routine where n is the length of the .ruf file in bytes.
RUF Block
Send a data block as part of a .ruf file transfer, the CRC over the data is returned
ATU2=n: Runs the RUF Block routine where n is the .ruf file data block.
RUF Status
Query the status of an in-progress .ruf file transfer
ATU4: Runs the RUF Status routine.
RUF Query
Query the most recently completed .ruf file transfer
ATU5: Runs the RUF Query routine.
RUF Update
Execute an update to the most recently transferred .ruf file
ATU6: Runs the RUF Update routine.
Save All
Write through all AT command sets since power-on-reset to EEPROM
AT&W: Runs the Save All routine.
AT Error Code
Display an error code representing the last error processing an AT command.
AT%14: Runs the AT Error Code routine.
AT Error String
Display a string representing the last error processing an AT command.
AT%15: Runs the AT Error String routine.
Password
Set the device password
AT%23=n: Runs the Password routine where n is the new password.
Open Menu
Open the terminal menu on this stream
AT?: Runs the Open Menu routine.
Stream Index
Show the index number of this stream
AT&S0: Runs the Stream Index routine.
Cruise Control Menu
Product String
The model name for this device.
ATI0: Returns the current value of Product String.
Manufacture Date
Date on which this device was manufactured.
ATI5: Returns the current value of Manufacture Date.