User's Manual

Management Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 68 of 134
C.2 SNMP Diagnostic Parameters
Table 31 outlines the parameters accessible by SNMP. An ‘R’ under the access column indicates the parameter
is read-only; an ‘R/W’ indicates read-write.
SNMP Textual Name
Access
Description
Diagnostics
rfiDiagTimeLcl
R
The current local time (in seconds since Jan 1 1970).
rfiDiagTimeLclstring
R
The current local time.
rfiDiagTimeUp
R
Seconds since the radio powered up.
rfiDiagTimeUtc
R/W
The current UTC (in seconds since Jan 1 1970).
Fan Control
rfiFanCtrlForce
R/W
Manual fan override (allows fans to be forced on).
rfiFanCtrlSensor
R/W
Temperature sensor used for fan control.
rfiFanCtrlTempOff
R/W
Sensed temperature below which fans will be turned off.
rfiFanCtrlTempOn
R/W
Sensed temperature above which fans will be turned on.
rfiFanSensTemp
R
Current temperature at sensor used for fan control.
Faults
rfiFaultHistTblFault
R
The fault that occurred.
rfiFaultHistTblTime
R
The time that the fault occurred.
rfiFaultTblAction
R/W
Configured action to be taken when this fault occurs.
rfiFaultTblActtime
R
Duration for which this fault has been active, or 0 if the fault is not
active.
rfiFaultTblCount
R/W
The number of times this fault has occurred since the statistics
were reset.
rfiFaultTblLatch
R/W
Configured latching mechanism for this fault.
rfiFaultTblName
R
Name of the fault in this row of the table.
rfiFaultTblStatus
R
Indicates whether or not this fault condition is currently active.
Identity
rfiIdApproval
R
International type approval code which applies to this device.
rfiIdFwver
R
Version information for the firmware loaded in this device.
rfiIdMfdate
R
Date on which this device was manufactured.
rfiIdOphours
R
An approximation of the total number of hours that this device has
been powered up.
rfiIdProdstr
R
The model name for this device.
rfiIdSerialno
R
Factory assigned serial number for this device.
Paging Protocols