User's Manual

Configuration
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 17 of 134
Figure 5: Cruise Control Sensor Gauges Plugin
To view Sensor Gauges for a paging transmitter, first connect to the paging transmitter using Cruise Control.
Then use the Tools -> Plugins -> Sensor Gauges menu item to open the Sensor Gauges plugin.
The Sensor Gauges will automatically update, with the needles showing the current value of the gauge
parameter. The green region indicates the expected normal operating value for the parameter. The upper and
lower cut-off values for the sensor (see Appendix E) determine the range of the green region. There is a red
indicator below each gauge which turns on when the parameter exceeds the upper or lower cut-off value.
The Groups option box on the left shows the different groups of gauges available, grouped by the unit of
measurement of the sensor. There are also two additional groups, overview and all. The overview group
provides a subset of the most informative gauges for quick diagnostic troubleshooting. The all group shows
all of the gauges.
3.2.5 Firmware Update
Cruise Control supports the updating of device firmware. Cruise Control will only allow firmware images that
are compatible with the paging transmitter to be uploaded. For more information, see Appendix F.