User's Manual

Configuration
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 15 of 134
3. Configuration
3.1 Overview
There are six interfaces available for configuration and diagnostic information to be monitored:
• Cruise Control management interface: All configuration and diagnostics parameters can be accessed
using the Windows-based Cruise Control Graphical User Interface (GUI).
• SNMP interface: Support for diagnostics using SNMP through the RFI SNMP Proxy agent.
• Terminal menu interface: A navigable menu system is available that has all the configuration and
diagnostics that Cruise Control provides.
• AT command interface: The AT command interface provides a subset of the configuration and
diagnostic information available over Cruise Control with ASCII Hayes attention commands. For a list
of AT commands see Appendix D Hayes AT Reference.
• Front panel interface: The front panel consists of six status LEDs and a transmit power gauge.
• LIU interface: The combined LIU interface has digital inputs and alarm outputs for limited
configuration and diagnostic output.
3.2 Cruise Control
This section outlines how to use Cruise Control with the paging transmitter. For more information see the
Cruise Control User Manual. Figure 4 below is a screenshot of Cruise Control running on Windows 10.
Figure 4: Cruise Control Interface