User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 112 of 134
Where: a = table index (starting from 0).
Type
ATU49[a]: Returns the current value of Type.
Enumeration values:
0 = None
1 = Firmware-New
2 = Firmware-Snapshot
3 = Bootloader-New
4 = Bootloader-Snapshot
5 = PLD-New
6 = PLD-Snapshot
7 = Modem-New
8 = Modem-Snapshot
Where: a = table index (starting from 0).
Version
The firmware version of the firmware image loaded into this memory bank.
ATU21[a]: Returns the current value of Version.
Where: a = table index (starting from 0).
Timestamp
The creation date or upload date of the firmware image loaded into this memory bank.
ATU22[a]: Returns the current value of Timestamp.
Where: a = table index (starting from 0).
(Distributer) Load Image
ATU51[a]: Runs the Load Image routine.
Where: a = table index (starting from 0).
Ethernet Statistics Menu
Ethernet Summary Statistics Table
Name
ATR251[a]: Returns the current value of Name.
Where: a = Ethernet Summary Statistics table index (starting from 0).
Value
ATR252[a]: Returns the current value of Value.
Where: a = Ethernet Summary Statistics table index (starting from 0).
Ethernet Error Statistics Table
Name
ATR253[a]: Returns the current value of Name.
Where: a = Ethernet Error Statistics table index (starting from 0).
Value
ATR254[a]: Returns the current value of Value.
Where: a = Ethernet Error Statistics table index (starting from 0).
Ethernet Data Statistics Table
Name