User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 110 of 134
Startup Date
ATG17: Returns the current value of Startup Date.
Power Off Date
ATG14: Returns the current value of Power Off Date.
UTC
The current UTC (in seconds since Jan 1 1970).
AT%63: Returns the current value of UTC.
AT%63=n.: Sets the value of UTC to n s, given that 0 <= n <= -1.
Time String Format (Stored)
ATG15: Returns the current value of Time String Format.
ATG15=n sets Time String Format to n.
Enumeration values:
0 = DoW MMM DD HH:MM:SS YYYY
1 = ''DD/MM/YYYY''
2 = DD/MM/YYYY
3 = ''DD/MM/YYYY HH:MM:SS''
4 = DD/MM/YYYY HH:MM:SS
5 = ''YYYY/MM/DD HH:MM:SS''
6 = YYYY/MM/DD HH:MM:SS
Time Zone (UTC +/-) Table
Hours (Stored)
The hours portion of the time zone.
ATG18[a]: Returns the current value of Hours.
ATG18[a]=[+/-]n.: Sets the value of Hours to n hrs, given that -12 <= n <= 14.
Where: a = Time Zone (UTC +/-) table index (starting from 0).
Minutes (Stored)
The minutes portion of the time zone.
ATG19[a]: Returns the current value of Minutes.
ATG19[a]=n.: Sets the value of Minutes to n mins, given that 0 <= n <= 59.
Where: a = Time Zone (UTC +/-) table index (starting from 0).
Firmware Update Menu
Current State
ATU50: Returns the current value of Current State.
Enumeration values:
0 = Normal
1 = New Firmware Image Invalid
2 = Firmware Image Download Cancelled
3 = No Valid Firmware Snapshot
4 = Mass Storage Read/Write Failure
5 = Scheduled CRC Check Failed
6 = Image Load Failed
7 = Modem Update Successful
Startup State