User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 108 of 134
ATG6: Returns the current value of Request Timeout.
ATG6=n[.m].: Sets the value of Request Timeout to n s, given that 0.000 <= n <= 65.535.
Send Request
ATG7: Runs the Send Request routine.
UDP Connections Table
Local Port
ATG49[a]: Returns the current value of Local Port.
Where: a = UDP Connections table index (starting from 0).
Remote IP
ATG50[a]: Returns the current value of Remote IP.
Where: a = UDP Connections table index (starting from 0).
Remote Port
ATG51[a]: Returns the current value of Remote Port.
Where: a = UDP Connections table index (starting from 0).
Diagnostics Menu
(Distributer) Estimated Life Uptime
An approximation of the total number of hours that this device has been powered up.
ATI206: Returns the current value of Estimated Life Uptime.
Total Tx Time
ATG155: Returns the current value of Total Tx Time.
Startup Reason
ATG9: Returns the current value of Startup Reason.
Enumeration values:
0 = Normal
1 = Explicitly Reset
2 = Firmware Update
3 = Exceptional
4 = Unknown
Startup Config
ATG154: Returns the current value of Startup Config.
Enumeration values:
0 = Normal
1 = Config. Reset
2 = Unknown
Approval Code
International type approval code which applies to this device.
ATI175: Returns the current value of Approval Code.
Enumeration values:
0 = ACMA
1 = FCC
2 = ETSI