User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 105 of 134
Link Speed
ATR257: Returns the current value of Link Speed.
Enumeration values:
0 = 10 Mbps
1 = 100 Mbps
Link Duplex
ATR258: Returns the current value of Link Duplex.
Enumeration values:
0 = Half duplex
1 = Full duplex
Auto Negotiation (Stored)
Configure whether the Ethernet interface will automatically detect link speed and duplex.
ATR259: Returns the current value of Auto Negotiation.
ATR259=n sets Auto Negotiation to n.
Enumeration values:
0 = Force
1 = Auto-negotiate
Forced Link Speed (Stored)
Configures the speed to use when the link parameters are forced.
ATR260: Returns the current value of Forced Link Speed.
ATR260=n sets Forced Link Speed to n.
Enumeration values:
0 = 10 Mbps
1 = 100 Mbps
Forced Link Duplex (Stored)
Configures duplex when the link parameters are forced.
ATR261: Returns the current value of Forced Link Duplex.
ATR261=n sets Forced Link Duplex to n.
Enumeration values:
0 = Half duplex
1 = Full duplex
TCP/IP Menu
IP Address
A read-only string that shows the current IP address of the unit. If DHCP is enabled this will be the IP
address assigned by the DHCP server. If DHCP is disabled this will be the configured static IP address.
ATI70: Returns the current value of IP Address.
Subnet Mask
ATI201: Returns the current value of Subnet Mask.
Gateway
ATI202: Returns the current value of Gateway.
Bcast Addr
ATI205: Returns the current value of Bcast Addr.