User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 104 of 134
0 = None
1 = Even
2 = Odd
Where: a = Settings table index (starting from 0).
Can return the following error codes:
1 = Configuration of this port is locked
Stop Bits (Stored)
The number of stop bits used on this serial port.
ATS103[a]: Returns the current value of Stop Bits.
ATS103[a]=n sets Stop Bits to n.
Enumeration values:
0 = 1
1 = 2
Where: a = Settings table index (starting from 0).
Can return the following error codes:
1 = Configuration of this port is locked
Reset Statistics
ATS189[a]: Runs the Reset Statistics routine.
Where: a = Settings table index (starting from 0).
Statistics Table
Name
ATS188[a,b]: Returns the current value of Name.
Where: a = Settings table index (starting from 0).
b = Statistics table index (starting from 0).
Value
Shows statistics for serial port events.
ATI20[a,b]: Returns the current value of Value.
Where: a = Settings table index (starting from 0).
b = Statistics table index (starting from 0).
LAN Interface Menu
Ethernet Menu
Local MAC Address
The factory-assigned Ethernet MAC address of the unit.
ATR46: Returns the current value of Local MAC Address.
Link Status
ATR255: Returns the current value of Link Status.
Enumeration values:
0 = Down
1 = Up
Auto Negotiation Status
ATR256: Returns the current value of Auto Negotiation Status.
Enumeration values:
0 = Not Completed
1 = Completed