User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 103 of 134
2 = Mirrors DCD
3 = Mirrors CTS
4 = Follows TX
Main RTS Mode (Stored)
Configures the behaviour of the RTS output on the main serial port.
ATS91: Returns the current value of Main RTS Mode.
ATS91=n sets Main RTS Mode to n.
Enumeration values:
0 = Always High
1 = Always Low
2 = Mirrors DCD
3 = Mirrors CTS
4 = Follows TX
Settings Table
Baud Rate (Stored)
The baud rate configured for this serial port.
ATS100[a]: Returns the current value of Baud Rate.
ATS100[a]=n sets Baud Rate to n.
Enumeration values:
1 = 300
2 = 600
3 = 1200
4 = 2400
5 = 4800
6 = 9600
8 = 19200
9 = 38400
10 = 57600
11 = 115200
Where: a = Settings table index (starting from 0).
Can return the following error codes:
1 = Configuration of this port is locked
Data Bits (Stored)
The number of data bits configured for this serial port.
ATS102[a]: Returns the current value of Data Bits.
ATS102[a]=n sets Data Bits to n.
Enumeration values:
0 = 7
1 = 8
Where: a = Settings table index (starting from 0).
Can return the following error codes:
1 = Configuration of this port is locked
Parity (Stored)
The parity configuration for this serial port.
ATS101[a]: Returns the current value of Parity.
ATS101[a]=n sets Parity to n.
Enumeration values: