User Manual

Appendix C Hayes AT Command Reference
RFI-9256 Radio Modem User Manual Page 82 of 96
 ATS43=400<CR> : Sets the radio to check for online status every 400ms.
C.2.11 “ATS44” Hopping Pattern Sequence
S-register 44 sets the hopping pattern sequence number used by the radio. All radios on a single network
must have the same hopping pattern sequence number in order to communicate. Valid values are between 0
and 31.
 ATS44=27<CR> : Sets the hopping pattern sequence number to 27.
C.2.12 “ATS45” Max TX Power
S-register 45 sets the maximum transmit power of the radio. The only valid formats for setting the maximum
transmit power are:
 ATS45=0<CR> : Sets the maximum transmit power to 0dBm.
 ATS45=10<CR> : Sets the maximum transmit power to 10dBm.
 ATS45=20<CR> : Sets the maximum transmit power to 20dBm.
 ATS45=25<CR> : Sets the maximum transmit power to 25dBm.
 ATS45=30<CR> : Sets the maximum transmit power to 30dBm.
C.2.13 “ATS47” Frame Time
S-register 47 sets the frame time in milliseconds. The only valid frame time values are:
 ATS47=5<CR> : Sets the frame time to 5ms.
 ATS47=8<CR> : Sets the frame time to 8ms.
 ATS47=10<CR> : Sets the frame time to 10ms.
 ATS47=15<CR> : Sets the frame time to 15ms.
 ATS47=20<CR> : Sets the frame time to 20ms.
 ATS47=25<CR> : Sets the frame time to 25ms.
 ATS47=30<CR> : Sets the frame time to 30ms.
 ATS47=35<CR> : Sets the frame time to 35ms.
C.2.14 “ATS48” Frame Bias
S-register 48 sets the frame bias of the radio. The only valid frame bias values are: