Manual
Reassembling of bolt:
- Insert cocking piece
in
the
slide piece body (Fig.32).
- Insert the bolt (with adap-
tor sleeve, bolt spring,
and bolt spring sleeve cor-
rectly attached) into the bolt
carrier. Make sure the con-
trol bolt
is
free to move
(Fig.33).
- Press the bolt down into the
bolt carrier until the control
bolt
is
visible
in
the cam
slot (Fig.34).
- While holding the bolt
in
this
position, reinstall the firing
pin
by
pushing it
in
until it
audibly engages (Fig.35).
This raises the control bolt
and locks the bolt
in
place.
Fig. 35
32
Fig. 32
Fig. 33
Fig. 34