Manual

Disassembly of the ejection lids, inner
and outer:
(Only for converting from right hand to left hand ejection. Note:
also requires new bolt assembly.)
Carefullyliftthe edge ofthe outerejection lid using ascrewdriver.
pocket knife or similar tool pushing it forward simultaneously
(Fig.28).
Nowthe outer ejection lid may be removed, while the
inner ejection lid drops downward into the stock and may be
removed either through the magazine well or through the
ejection port.
Fig. 28
30
Assembly of
ejection lids:
Place inner ejection lid
insidethe ejection port and
slide on outer ejection lid
until it engages (Fig.29).
Fig. 29