Manual

Dissasembly of the bolt group:
- Hold bolt group in left hand (operating rods pointing left).
- With the right hand rotate the firing pin 90 degrees
counterclockwise and remove it from the bolt (Fig.25).
- While keeping the bolt from moving forward with the left
index finger, use the right index finger to push down the
control bolt
in the bolt carrier's cam slot (Fig.26).
- The bolt, adaptor sleeve, bolt spring, and bolt spring
sleeve will now come out
as a unit. Remove the cocking
piece from the slide piece body (Fig.27).
Fig. 25 Rotatefiring pin
Fig. 26 Push down the
control bolt
Fig. 27
29