Manual

Elevation adjustment
screw
Fig. 10 Optical sight
Adjusting the optical sight:
The optical tube is mounted in the optic housing.
The special screws for elevating and lateral adjustment and
the fixing screw are adjusted at the factory prior to shipment
and
no further adjustment is recommeded (Fig.1 0).
Elevation is adjusted by turning the inner disc on the elevating
adjustment screw. Turning the elevation adjustment disc
in
direction of "U" raises the point of impact.
Turning the elevation adjustment disc in direction of "0" lowers
the point of impact.
Windage is adjusted by turning the inner disc on the lateral
adjustment screw. Turning the lateral adjustment
in direction
of arrow "R" (for right) moves the point of impact to the right;
turning the lateral adjustment disc
in direction of arrow "L" (for
left) moves the point of impact to the left.
To turn the inner discs, use the adjusting tool (#3
on the
accessories list) or the point of a bullet (Fig.11).
Lateral adjustment screw
Fig.
11 Using the
sight adjusting tool
21