Manual

26
ENGLISH
CAUTION!
When disassembling, never rotate the bolt sleeve in counterclock-
wise direction. Otherwise, the bolt could not be reinserted into
the receiver.
Reassembling the bolt:
1. Grip the bolt with your left hand and insert firing pin assembly
into bolt with the firing pin lug aligned directly opposite to the
bolt handle.
2. Using your right hand, slide the bolt cap on the firing pin lug
until it stops, simultaneously pressing the ratchet lever with your
thumb. Rotate the bolt cap counterclockwise until it locks into
position.
Make sure not to turn the bolt cap beyond the line of alignment.