Manual
25
ENGLISH
14. DISASSEMBLING THE BOLT
Under normal circumstances, the bolt doesn’t need to be disas-
sembled. It has been permanently lubricated by the factory. As
a rule, occasional inspection by the gunsmith of your franchised
MANNLICHER Dealer should be sufficient to ensure adequate main-
tenance. If you wish, you may ask an expert gunsmith to instruct
you in the disassembly and reassembly of the bolt. However, spe-
cial circumstances with no gunsmith available may require that the
bolt be disassembled, cleaned, and lubricated.
1. Grip the bolt with your left
hand. Push in catch lever with
your right thumb and simulta-
neously rotate the bolt sleeve
clockwise (arrow shows direction
of rotation) until it unlocks with
an audible click.
2. Take off bolt sleeve and extract
firing pin assembly.
If necessary you can clean and oil
all parts of the bolt complete.
Any further disassembly should be done only by adequately trained
and skilled personnel (gunsmith).
Disassembly:
Fig. 22
Fig. 23