Manual

ENGLISH

4. Run a clean patch through the barrel, from the chamber end, using

the cleaning rod.

5. Lightly wet a clean patch with gun oil or a cleaner-lubricant-preser-

vative and run it through the barrel from the chamber end.

6. Before firing your STEYR pistol, run a clean patch through the bar-

rel, from the chamber end, using the cleaning rod. Repeat this

procedure until the patch comes out of the barrel with no gun oil or

cleaner-lubricant-preservative on it.

If you will be storing your STEYR pistol, do not perform step

6 until you are ready to fire it.

Clean the slide, rails, outside of the barrel, and slide catch as follows

(refer to illustrations on this page):

1. Wet a nylon bristle brush with a gun cleaning solvent or a cleaner-

lubricant-preservative and thoroughly brush these areas to remove

any dirt or residue.

2. Wipe the areas dry with a clean patch and examine it. If it is not

clean, repeat steps one and two until the patch remains clean.