Manual

33
ENGLISH
Do not over lubricate your STEYR AUG because too much
lubricant can collect unburned powder and other debris and prevent
your STEYR AUG from functioning properly.
After you have completed cleaning your STEYR AUG, reas-
semble it as described in Chapter 7.
Fig. 43
3. Apply 2 drops of oil onto both of the bolt guide rods;
4. Apply 2 drops of oil between the control bolt and control slot;
5. Apply 1 drop of oil onto the locking piece;
6. Apply a very thin coat of oil to the metal surfaces on the outside of
the STEYR AUG;
Innen USA.indd 33 04.02.2009 14:37:53 Uhr