User Manual
8
2.2.3 Product Dimensions
2.3 Proper Cooling Considerations
Because CVA50-1 Priority PA ampliers regulates their temperature
using convection cooling and no fans, the ampliers must be given ade-
quate space to allow for proper airow. Do not stack the ampliers on
top of each other or mount it in a way that other equipment will block
airow along the surfaces of the case.
CAUTION: Inadequate airow to the amplier can cause the
amplier to overheat and potentially become damaged in
the process. Be sure to provide plenty of air space to allow
for convection cooling.
CVA50-1 PA
6.25in
15.9cm
1.38in
3.5cm
1.38in
3.5cm
4.13in
10.5cm
9
2.4 Input Connections
Your CVA50-1 Priority PA amplier is provided with a 3-pin Euro Block
connector for its input connection. This connector will accept both bal-
anced or unbalanced connections, however some modications must
be made for an unbalanced connection. See the next two sections for
instructions on connecting your amplier to its input source.
2.4.1 Balanced Input Connections
When using a balanced input source and connector, you must ensure
that the hot, cold, and ground pins of the connector are matched up to
the +, -, and ground pins of the CVA50-1 Priority PA Euro Block con-
nector respectively. Diagrams have been provided for standard XLR
and TRS connectors. Please refer to the manual of your input source in
case it does not follow the standard pin-out.
NOTE: The CVA50-1 Priority PA ampliers does not accept
TRS inputs wired for a stereo source. TRS inputs should
only be used for balanced mono inputs.