Owner's manual
2 Setup
2.1 Setup Precautions
CAUTION: Before installing your amplier, make sure that
you have read the Important Safety Precautions at the be-
ginning of this manual.
2.2 Amplier Installation
The AV25-2 NET+ incorporates a number of different mounting options
in order to t your installation needs.
2.2.1 Pole-Mounting
The AV Series of ampliers is Stewart Audio’s rst line of pole-
mountable ampliers. The AV25-2 NET+ has mount holes on both the
top as well as the side of the unit which can be used with the AV-Pole
bracket available from Stewart Audio.
Part Number: AV-Pole
2.2.1 Universal-Mount Installation
The AV25-2 NET+ also has a universal bracket available which allows
the unit to be mounted against a wall or under a table. Two screws are
included in the kit which will afx the bracket to the top or the side of
the unit. Once this is done, two holes are available for mounting the
unit where desired.
CAUTION: Use only the screws provided in mounting
brackets to the amplier. Do not over tighten.
Part Number: AV-Bracket
AV25-2 NET+