Use and Care Manual
ZR380CS
ASSEMBLY INSTRUCTIONS
P.2/4
DO NOT FULLY TIGHTEN ALL BOLT & HEX NUTS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED
Step 3: Product assembly is now completed.
Step 2: Use Wood screw (4) to attach the joints at the foot of the chair by the screwdriver.Fully tighten bolts at
this time.
1
5
4
C
B
E
D
F
Step 1:Attach the Right Leg (B) and the Left Leg (C) to the Seat Cushion (A) by using Flat Washer (3), Lock
Washer (2) and Bolt (1). Secure well by Allen Key (5). Do not fully tighten. Connect the Right Leg (B) with the
Left Leg (C) by the Side stretcher (F), Front stretcher (D) and Back stretcher (E).
B
C