Use and Care Manual

Table Of Contents

P.2/4

SN500T

ASSEMBLY INSTRUCTIONS

DO NOT FULLY TIGHTEN ALL BOLTS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED

Step 1: Place Table Top (A) upside down on a piece of cloth or carpet to prevent finish from scratching.

Attach Table Leg (B) to the corner block of the Table Top (A) by inserting Flat Washer (3), Lock Washer (2),

Hex Bolt (1) and fully tighten with Allen Key (4).

Step 2: Turn the Table to upright position on flat surface (*Note: It is recommended to use two or more

people to turning the table). Assembly product is now completed.