Item #: Description: Product Size: P.l/5 LR700CCG LORI COUNTER CHAIR GREY 175" x19.25" x39" H Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with a minimum amount of effort. Properly caring for your furniture can help ensure that it looks great year after year. ‘Wood Furniture Maintenance: Always dust, wipe, and clean with the grain of the wood. Dust with a soft cloth. Dust will scratch the furniture surface if not removed properly.
LR700CCG F2s ASSEMBLY INSTRUCTIONS DO NOT FULLY TIGHTEN ALL HEX NUTS AND BOLTS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED| Step 1: Place Chair Back (A) on the floor. Attach Seat Box w/Seat Cushion (B) to Chair Back (A) by using the Flat Washer (4), Lock ‘Washer (3), Long Bolt (1) into the holes at the rear corner block of the seat box and secure by Open Wrench (7). Insert Flat Washer (4), Lock Washer (3), Short Bolt (2) into the holes at the rear bar of the seat frame.
PART LIST P3/5 (B) SEAT BOX (C) AFFRONT | (D) RSF FRONT ) W/ SEAT CUSHION LEG LEG (1PC) (1PC) (1PC) (E) FRONT STRETCHER (F) LSF SIDE STRETCHER (G) RSF SIDE STRETCHER (1PC) (1PC) (1PC) sticker stick under stretcher sticker stick under stretcher HARDWARE PACK # : PLR700CCGH NO.
P4/5 PARTS FOR LR700CCG COMPLETE HARDWARE # : PLR700CCGH PLR700CCGB CHAIR BACK PLR700CCGSC SEAT CUSHION PLR700CCGSB PLR700CCGLSISS SEAT BOX LSF SIDE STRETCHER S C PLR700CCGRSISS RSF SIDE STRETCHER PLR700CCGRFL RSF FRONT LEG FRONT STRETCHER FABRIC CONTENT : 100% Polyester & Other This fabric is not machine washable. Allow residual shrinkage. Do not use cleaning products brightening agents.
P.5/5 Steve Silver Company Dining Chairs Assembly Troubleshooting Guide The most important element of correct chair assembly is to tighten the bolts as directed. Prematurely tightening the bolts can lead to numerous issues and will lengthen the assembly time. Listed below are the most common issues in chair assembly and their easy solutions. PROBLEM: Chair is level. Cause 1: Level chairs can occur if the bolts are fully tightened before all bolts are attached.
