Use and Care Manual

A x 4
B x 2 C x 2 D x 2
Installation Instructions:
1.
Attach one of the mounting brackets securely to the back edge of the furniture. Use
the shorter screw.
2
.
Determine where furniture is to be placed and mark location on the wall for the
mounting bracket screw hole approximately 2” below the bracket mounted to the
edge of the furniture.
3.
Drill a 3/16” hole in the wall. Press the plastic anchor into the hole and gently tap
until the flange on the anchor is against the wall surface.
4.
Position the bracket over the anchor and use the longer screw to securely attach the
bracket to the wall.
5.
Place the furniture so the bracket on the back edge is in line with the bracket on the
wall.
6.
Lace an end of the nylon restraint strap down through each bracket. Bring both ends
together and slide the beaded end of the strap through the keyhole shaped slot in the
other end until snug. Pull down on the beaded end until it snap locks into the keyhole
slot.
7.
To double lock return the beaded end back through the keyhole as shown.
8.
Check to make sure the strap is securely laced and locked to the brackets.
Parts Euclosed
P.
2
/
3