Use and Care Manual

CY400SK
ASSEMBLY INSTRUCTIONS
P. 2/4
STEP 2: Attach the LSF/RSF Front Leg (C,D) to Wood Seat w/Seat Box (B) by using Flat Washer (5),
Lock Washer (4) , Hex Nut (6) and secure by Wrench (7).Attach Front Stretcher (E) and LSF/RSF Stretcher
(F,G) to the LSF/RSF Front Leg (C, D) and Chair Back (A) by using Screws (3), tighten by a Phillips-head
screw driver (Tool required).Insert Wood Glue (8) into the holes as picture shown. Fully tighten all bolts
and screws as this time. Assembly product is now completed.
STEP 1 : Place the Chair Back (A) on the floor. Attach Wood Seat w/ Seat Box (B) to the Chair Back
(A) by using Flat Washer (5), Lock Washer (4), and Long Bolt (2) into the holes at the corner block of the
seat frame. Secure by Wrench. Insert Flat Washer (5), Lock Washer (4), and Short Bolt (1) into the rear
bar of seat frame. Secure by Wrench (7). Do not fully tighten.
Do not fully tighten bolts and screws until the entire item is completely assembled.