User Manual

STETSOM
EN-US
Installation Diagram
RED
BLACK
Amplifier
Radio / Player
L R
Ground
POWER SUPPLY
REM OUT (blue)
REM IN: Check the remote
drive installation modes on
the following pages.
HIGH INPUT
BLUE
GRAY
STETSOM
Installing the REMOTE IN connection
The ST6000 can have its REMOTE IN (REM) connection wired
three dierent ways, depending on your vehicle’s system:
• CAN SYSTEM: This system has timings that can cause PUFF
in the audio system. To minimize this happening in vehicles with
this system, we recommend installing the REMOTE IN (green)
wire to the ignition switch signal.
• AUTO TURN ON: Connect the REMOTE IN (green) wire to
any of your radio’s audio outputs. The ST6000 will detect the
presence of audio and automatically power on.
REM IN
(Green)
REM IN (Green)
IGNITION
HIGH INPUT
(Radio / Player)
• MANUAL ACTIVATION: Use a switch between the REMOTE
IN (green) and the positive battery connection for manual
operation of the ST6000.
If your radio has a remote (REM) output, connect
it directly to the ST6000’s REM IN (green) for its
automatic activation.
Switch or Button
REM IN (Green)
Especificações Técnicas
Power supply:
Remote In:
Consumption (standby):
Max. input voltage @ 12.6V:
Input Impedance:
Output impedance:
Minimum load impedance:
Frequency response:
Max. remote output current:
Protection:
9V ~ 15V
4,5V ~ 15V
5mA @ 12,6V
9Vrms
1Kohms
470 Ohms
1K Ohm
Full Range
80mA
Short on remote output
Warranty Term
STETSOM, through its network of Authorized Technical Assistance
Providers, guarantees technical assistance to the purchaser of their
products. The repairs of any defects duly established as being of the
manufacturer will be done without cost for replacement components
or parts and repair labor. The repairs will be done by the Authorized
Technical Assistance Provider specially designated by STETSOM.
CONSULT THE LIST OF AUTHORIZED TECHNICAL ASSISTANCE
PROVIDERS ON OUR WEBSITE:
www.stetsom.com.br/en/assistencias-tecnica
If you do not locate technical assistance in your city, please contact
us at: BR [phone]
WARRANTY CONDITIONS:
Our warranty is 1 (one) year against manufacturing defects. Its
validity starts on the date of the Sale to the FINAL Consumer.
To claim the benefits of this warranty, you must present one of
the following documents: the Final Consumer’s SALE NOTE or this
completed CERTIFICATE.
SITUATIONS THAT VOID THE WARRANTY:
1. 1 year after the issuance of the invoice of sale to the consumer or 1
year after the certificate of warranty is filled out (dated and stamped
by the retailer or installer) or 1 year from date of manufacture.
2. Violation of seals, alteration or removal of the product’s serial or lot
number.
3. If the product suers misuse or careless accidents involving:
Water, Fire or Fall, or is installed in conditions contrary to the
guidelines contained in the installation manual that accompanies the
product.
4. Damages and changes in the circuit or adaptation of non-original
parts.
5. If you use installation techniques contrary to those given in the
manual.
QUESTIONS AND ADVICE:
STETSOM oers Customer Services to answer questions and give
advice about their products and services. Please contact us through
the channels:
Phone: BR [phone]
E-mail: [e-mail]
Website: www.stetsom.com
Any updates made to this manual will be made available for consultation by
the consumer free of charge on the brand’s website. It is recommended that
the updated manual be consulted whenever necessary.