User Guide

SSE 2
4-8 Assembly instructions
4.5. Electrical connection
M The regulations of the local Electricity Board must be observed.
Before connection to the electricity supply, ensure that the supply voltage and
the power frequency are in accordance with the data on the nameplate of the
machine.
The electrical connection may only be carried out by Sterling service staff or
trained personnel authorized by Sterling.
It is not permitted for other persons to undertake the electrical connection.
The main switch must be freely accessible.
Ground the equipment against electrostatic charging.
The operating voltage is 110V/1/60 Hz. Special voltages are available on request.
The connected load is approx. 800 W.
The equipment is connected to main power supply by a standard plug.
Separate fuse protection of the wall socket is required (max. 16 A).