Installation Guide

File the bottom track edges to fit the curved
corners of the shower unit. Center the bottom
track on the ledge with the leg to the outside.
Tape in place and mark the position.
1184393-2-A
1
4
3
2
CAUTION: Risk of injury or property damage.
Do not attempt to cut tempered glass.
IMPORTANT! This shower door has a tapered
wall jamb and is designed to be used with a
Sterling 6203 or 6204 series shower unit.
IMPORTANT! Do not cut the top track the same
length as the bottom track.
Walls must be within 3/8" (10 mm) of plumb.
Cover drain with tape to avoid loss of small parts.
Follow the silicone sealant manufacturer's
instructions for application and curing time.
Installation video available at
SterlingPlumbing.com.
Plumb both wall jambs. Tape in position. Mark
the screw hole locations.
Position the wall jambs over the bottom track.
Snip or file the bottom edges for a snug fit.
Use the short bottom track with the 48" (1219
mm) 6203 series shower or use the long bottom
track with the 60" (1524 mm) 6204 series shower.
Screw Cover
Screw Cover
x2
Secure both wall jambs with screws. Attach a
bumper only to the middle location.
B
x2
6
Top Track
To Outside
3
2
1
5
98
7
Drill 5/16" holes at the marked locations.
Measure distance "B" above the jambs. Subtract
1/32" (1 mm) from "B" and cut the top track.
Apply silicone sealant in the groove on the
underside of the bottom track. Secure the track to
the mark on the ledge using masking tape.
Insert the anchors.
Bottom
Groove
Level
Wall Jamb
x6
Threshold
Bottom Track
#8-18 x 2"
Threshold
Bottom Track
x2
x2
Length = B - 1/32" (1 mm)
Screw
Screw
Outside Panel
S11029.90
S11029.21
(SP5965-48)
(SP5975-59)
Inside Panel
S11030.98
S11030.21
(SP5965-48)
(SP5975-59)
Wall Jamb
1093638-01**
1093638-02**
[64" (1626 mm)]
[68-7/16" (1738 mm)]
Inside-Panel Guide
10075.61
10075.20
[20-1/4" (514 mm)]
[26-15/16" (684 mm)]
1093638-17**
Bottom Track
Towel Bar
883963
883901
[20-3/4" (527 mm)]
[27-7/16" (697 mm)]
Screw
1048208-N
Screw
1048208-N
1048208-B
Screw
1048208-H
Screw
#8-18 x 3/4"
#8-18 x 2"
Hardware Skin Pack
1093631**
Model Number:______________
Tin Snips
#8-32 x 3/8"
1052906-A
Roller
172818
#8-18 x 3/8"
Roller
172818
Tape
676200
Bracket
1022794**
Screw Cover
1031943**
Screw Cover
1031943**
Screw Cover
1031943**
Bushing
1080397
Pile Seal
1080399
Bushing
1080398**
Bumper
1081001
Anchor
1077762
#8-32 x 3/8"
1052906-A
Bumper
1081001
Required Tools
Bypass Shower Doors
Miter Box
32 Teeth Per Inch Blade
Top Track
#8-18 x 2"
Anchor
1077762
Series Number Label
Parts Identification
Masking Tape100% Silicone Sealant
S11134.01
*Call Customer Care Center to order replacement parts.
**Finish/color code must be specified when ordering.
Retain this document for future servicing.
Record model number from box for reference.
Installation Guide
SP5900 Series Bypass Shower Doors
1
USA: 1-800-STERLING (1-800-783-7546)
Mexico: 001-877-680-1310
SterlingPlumbing.com
5/16"
5/16" Masonry Bit for Tile
3/16"