Specification

Features

•

Anodized aluminum construction

•

Finish matched to other Kohler and Sterling products

•

Includes installation hardware

•

Installs from the front side of the wall

•

Variable bracket spacing allows for ﬂexible installation

•

10-year consumer/3-year commercial limited warranty

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

•

ASME A112.18.1/CSA B125.1

•

ASTM F446

GRAB BAR

80001012

ALSO 80001018, 80001024, 80001036

Colors/Finishes

•

V: Matte Silver

•

N: Nickel

Speciﬁed Model

Model Description Colors/Finishes

80001012 12″ (30.5 cm) grab bar ❑ V ❑ N

80001018 18″ (45.7 cm) grab bar ❑ V ❑ N

80001024 24″ (61 cm) grab bar ❑ V ❑ N

80001036 36″ (91.4 cm) grab bar ❑ V ❑ N

Recommended Tools

1153882 9″ (22.9 cm) long T-Handle hex wrench, 1/8″ drive

Page 1 of 2

1151621-4-

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

PAGE 1
Features • • • • • • GRAB BAR Anodized aluminum construction Finish matched to other Kohler and Sterling products Includes installation hardware Installs from the front side of the wall Variable bracket spacing allows for flexible installation 10-year consumer/3-year commercial limited warranty 80001012 ALSO 80001018, 80001024, 80001036 Codes/Standards Applicable Specified model meets or exceeds the following: • ASME A112.18.1/CSA B125.
PAGE 2
Installation Notes Install this product according to the installation guide. WARNING: Risk of personal injury. The wall plates on the grab bar must be mounted to a brace between the wall studs. Doing so will ensure that the weight of the user is adequately supported. The appearance of the product may differ from the product diagram. The dimensions still apply. 2-1/2" (6.4 cm) D. 80001012 = 8" (20.3 cm) to 9-1/2" (24.1 cm) 80001018 = 12" (30.5 cm) to 15-1/2" (39.4 cm) 80001024 = 16" (40.