Specification

Technical Information
Fixture*:
Basin area:
Bathing well 44″ (1118 mm) x 25-1/2″ (648 mm)
Top area 51″ (1295 mm) x 26-3/4″ (679 mm)
To overflow:
Water depth 15-1/4″ (387 mm)
Capacity 59 gal (223.3 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding-type plug-in cord. Locate
the outlet within 24″ (610 mm) of the pump.
Pump service access is required.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
60" (1524 mm)
36" (914 mm)
60" (1524 mm)
20-5/16"
(516 mm)
18-3/4"
(476 mm)
36"
(914 mm)
24"
(610 mm)
Recommended Support
Clip Location (5 Total)
Ledger Strip Locations
34-1/2"
(876 mm)
Overflow Detail
60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max
18"
(457 mm)
8-3/4"
(222 mm)
12"
(305 mm)
8"
(203 mm)
4"
(102 mm)
Ø 2" (51 mm) Drain
Drain Cutout
16" (406 mm)
44" (1118 mm)
30" (762 mm)
3-1/2" (89 mm)
3-5/16"
(84 mm)
Product Diagram
LAWSONTM
LAWSONTM 36″ (914 mm) DROP-IN WHIRLPOOL BATH
Page2of2
1105586-4-
D