Dimensions Guide

Technical Information
Fixture*:
Basin area:
Bathing well 44″ (1118 mm) x 21-1/2″ (546 mm)
Top area 51″ (1295 mm) x 22-3/4″ (578 mm)
To overflow:
Water depth 15-1/4″ (387 mm)
Capacity 53 gal (200.6 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding-type plug-in cord. Locate
the outlet within 24″ (610 mm) of the pump.
Pump service access is required.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
60" (1524 mm)
32" (813 mm)
60" (1524 mm)
20-5/16"
(516 mm)
18-3/4"
(476 mm)
16"
(406 mm)
8-3/4"
(222 mm)
10"
(254 mm)
32"
(813 mm)
22"
(559 mm)
8"
(203 mm)
4"
(102 mm)
Ø 2" (51 mm) Drain
60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max
Drain Cutout
Recommended
Support Clip Location (5 Total)
Ledger Strip Locations
30-1/2"
(775 mm)
3-1/2" (89 mm)
3-5/16"
(84 mm)
Overflow Detail
16" (406 mm)
44" (1118 mm)
30" (762 mm)
Product Diagram
LawsonTM
LawsonTM 32″ (813 mm) DROP-IN WHIRLPOOL BATH
Page2of2
1105584-4-
D