Installation Guide

Troubleshooting Table (cont.)
Symptoms Probable Causes Recommended Action
B. Sealant or gasket failure at holes
through finished walls, shower
door, or wall surrounds.
B. Replace any defective gaskets or
seals. Apply clear 100% silicone
sealant as required.
6. Mold or mildew detected
(for units with wall
surrounds).
A. Blocked channel drainage. A. Use a sharp wooden or plastic
object to scrape any buildup from
the seam. Increase the frequency of
cleaning.
7. Water damage at finished
walls.
A. Seam at finished wall not
sealed.
A. Seal the seam with clear 100%
silicone sealant, following the
manufacturer’s instructions.
1070292-2-E 22 Sterling