Specification

Technical Information
Fixture*:
Basin area:
Bathing well 42″ (106.7 cm) x 20″ (50.8 cm)
Top area 54″ (137.2 cm) x 26″ (66 cm)
To overflow:
Water depth 13-3/4″ (34.9 cm)
Capacity 55 gal (208.2 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Model door maximum
width
door maximum
height
76121110
76121120
*57-11/16″
(146.5 cm)
*NA
* Varies with alternative walls.
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/Control 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding-type plug-in cord. Locate
the outlet behind the whirlpool, and within 24″
(61 cm) of the pump.
Do not disassemble the pump or piping as this could void the
warranty.
Size the drain cutout to fit the drain assembly that will be
used.
2" (5.1 cm)
3-1/2"
(8.9 cm)
4" (10.2 cm)
30" (76.2 cm)
8" (20.3 cm)
16" (40.6 cm)
14" (35.6 cm)
6" (15.2 cm) (Typical)
2" (5.1 cm) D. Drain
Drain Cutout
Overflow Detail
2-7/8" (7.3 cm)
18" (45.7 cm)
60" (152.4 cm)
20" (50.8 cm)
21" (53.3 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
8-1/2"
(21.6 cm)
15-1/2"
(39.4 cm)
8-1/2"
(21.6 cm)
22-1/2"
(57.2 cm)
Pump Motor
Location
33-1/4"
(84.5 cm)
32"
(81.3 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 32″ (81.3 cm) WHIRLPOOL BATH
Page2of2
1038459-4-
F