Specification

Technical Information
Fixture*:
Basin area:
Bathing well 40″ (1016 mm) x 21″ (533 mm)
Top area 52″ (1321 mm) x 29″ (737 mm)
To overflow:
Water depth 11″ (279 mm)
Capacity 40 gal (151.4 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Model Door maximum width Door maximum height
76100110
76100120
*58-1/2″ (1486 mm) *55-3/4″ (1416 mm)
* Varies with alternative walls.
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding type plug-in cord. Locate
the outlet behind the whirlpool, and within 24″ (610 mm) of
the pump.
Do not disassemble the pump or piping as this could void the
warranty.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
3-1/2"
(89 mm)
30" (762 mm)
3-1/8" (79 mm)
Overflow Detail
1-1/2"
(38 mm)
37-1/2"
(953 mm)
24-1/2"
(622 mm)
8-3/4"
(222 mm)
8"
(203 mm)
53"
(1346 mm)
73-1/4"
(1861 mm)
3"
(76 mm)
16"
(406 mm)
60"
(1524 mm)
1-1/2"
(38 mm)
19"
(483 mm)
20"
(508 mm)
36"
(914 mm)
16"
(406 mm)
14"
(356 mm)
6" (152 mm)
(Typical)
37-1/2"
(953 mm)
Ø 2" (51 mm)
Drain
8-3/4"
(222 mm)
Pump
Motor
Location
60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max
17-1/4"
(438 mm)
Drain Cutout
4"
(102 mm)
Recommended Support Clip
Location (4 Total)
Product Diagram
ENSEMBLETM
ENSEMBLETM 36″ (914 mm) WHIRLPOOL BATH AND WALL SURROUND
Page2of2
1016911-4-
K