Specification

Technical Information
Fixture*:
Bathing well:
Basin area 21-1/2″ (54.6 cm) x 46-1/8″ (117.2 cm)
Top area 23″ (58.4 cm) x 51″ (129.5 cm)
To overflow:
Water depth 13-1/8″ (33.3 cm)
Capacity 56 gal (211.8 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Model Door maximum
width
Door maximum
height
76150110P
76150120P
56-3/4″ (144.1 cm) 55-7/8″ (141.9 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with lead wires routed into an electrical box.
Provide electrical service by making connection inside the
supplied box.
Do not disassemble the pump or piping as this could void the
warranty.
Size the drain cutout to fit the drain assembly that will be
used.
Stud positioning is critical.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Bath cannot be installed without the wall surround.
30" (76.2 cm)
14" (35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
Drain Cutout
2-7/8" (7.3 cm)
Overflow Detail
1-1/2"
(3.8 cm)
2" (5.1 cm)
D. Drain
9-1/4"
(23.5 cm)
8"
(20.3 cm)
24-1/4"
(61.6 cm)
6" (15.2 cm)
(Typical)
10"
(25.4 cm)
16-1/4"
(41.3 cm)
55-1/4"
(140.3 cm)
75-1/2"
(191.8 cm)
60"
(152.4 cm)
32" (81.3 cm)
20" (50.8 cm)
33-1/4"
(84.5 cm)
33-1/4"
(84.5 cm)
1-1/4"
(3.2 cm)
18"
(45.7 cm)
19"
(48.3 cm)
21"
(53.3 cm)
60"
(152.4 cm)
Product Diagram
ACCORD
®
ACCORD
®
60″ (152.4 cm) WHIRLPOOL BATH AND WALL SURROUND
Page2of2
1140649-4-
A