Installation and Care

Roughing-In
NOTE: The diagram shown above is representative and for use with table below.
ABCDE F
7224 series 36-1/8″
(91.8 cm)
18″ (45.7
cm)
10″ (25.4
cm)
16″ (40.6
cm)
77″ (195.5
cm)
7-5/8″
(19.6 cm)
7225 series 42-1/8″
(107 cm)
21″ (53.3
cm)
13″ (33
cm)
16″ (40.6
cm)
77″ (195.5
cm)
7-5/8″
(19.6 cm)
7226 series 48-1/8″
(122.2 cm)
24″ (61
cm)
16″ (40.6
cm)
16″ (40.6
cm)
77″ (195.5
cm)
7-5/8″
(19.6 cm)
7227 series 60-1/8″
(152.7 cm)
30″ (76.2
cm)
16″ (40.6
cm)
14″ (35.6
cm)
77″ (195.5
cm)
7-5/8″
(19.6 cm)
7228 series 48-1/8″
(122.2 cm)
24″ (61
cm)
16″ (40.6
cm)
16″ (40.6
cm)
76″ (193
cm)
21-1/4″
(54 cm)
7229 series 60-1/8″
(152.7 cm)
30″ (76.2
cm)
16″ (40.6
cm)
14″ (35.6
cm)
76″ (193
cm)
21-1/4″
(54 cm)
IMPORTANT! All dimensions are nominal. The stud opening tolerance is +1/8″ (3
mm)/-0. Carefully measure your fixture before determining enclosure size. Some
shimming between the stud frame and the fixture may be required. If a firewall is
required, rough-in dimensions will have to increase according to the thickness of the
firewall material. Stud opening dimensions must be measured toward the exposed
side of the wall material. Dimensions given in the rough-in information are crucial for
proper installation. Construct the framing and plumbing accurately.
37-1/4"
(94.6 cm)
F
16-3/8"
(41.6 cm)
Series/Séries/Serie 7224, 7225, 7226, 7228
Series/Séries/Serie 7227,7229
E
CC
D
CC
D
3-1/4" (8.3 cm) D.
Ø 3-1/4" (8,3 cm)
3-1/4" (8,3 cm) D.
4-1/2" (11.4 cm) D.
Ø 4-1/2" (11,4 cm)
4-1/2" (11,4 cm) D.
4-1/2" (11.4 cm) D.
Ø 4-1/2" (11,4 cm)
4-1/2" (11,4 cm) D.
10" (25.4 cm)
10" (25.4 cm)
8" (20.3 cm)
8"
(20.3 cm)
4" (10.2 cm)
4" (10.2 cm)
26" (66 cm)
26"
(66 cm)
B
A
A
A
Sterling 7 1092037-2-E