Specification Sheet

Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″ (117.5 cm) x 20-1/2″ (52.1 cm)
Top area 52-1/4″ (132.7 cm) x 22-1/2″ (57.2 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140112
71140122
71240112
71240122
56-3/4″ (144.1 cm) 56-1/2″ (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
The width of the module gets 5/8″ (1.6 cm) narrower at the
back. Furring strips (approximately 1/4″ (6 mm)) should be
used at the back corner studs if drywall will overlap the nailing
flange.
30" (76.2 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
8"
(20.3 cm)
14"
(35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
55"
(139.7 cm)
75-1/2"
(191.8 cm)
1-1/4" (3.2 cm)
3-1/8" (7.9 cm)
Overflow Detail
3-1/2"
(8.9 cm)
2" (5.1 cm) D.
Drain
10"
(25.4 cm)
31-1/4"
(79.4 cm)
6" (15.2 cm)
(Typical)
21-1/4"
(54 cm)
20-1/4"
(51.4 cm)
2" (5.1 cm)
Minimum Drain
Hole Clearance
Through Wall
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
31-1/4"
(79.4 cm)
30"
(76.2 cm)
17-1/4"
(43.8 cm)
60"
(152.4 cm)
3" (7.6 cm) Drain
Bottom to Floor
Product Diagram
ACCORD
®
ACCORD
®
60″ (152.4 cm) AFD BATH AND WALL SURROUND
Page2of2
1067279-4-
E