Specification Sheet

11-5/8"
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Double studding is recommended for pivot shower
door installations.
LeftDrain location:
46-1/4" x 20-1/2" (1175 mm x 521 mm)Basin area, bottom:
Studs should be positioned roughly as shown.
52-1/4" x 22-1/2" (1327 mm x 572 mm)Basin area, top:
Measure your actual product for roughing-in
details.
11" (279 mm)Water depth:
34 gal (128.7 L)Water capacity:
Product is designed to be used with a
single-handle mixer valve with an escutcheon
cover not to exceed 7-3/4" (197 mm) in width.
56-1/2" (1435 mm)Door height required:
56-3/4" (1441 mm)Door width required:
Bath cannot be installed without the wall
surround.
Width of back wall at top transitions from 60"
(1524 mm) at the front to 59-3/8" (1508 mm) in
the back corners. Furring strips approximately
1/4" (6 mm) thick should be used at the back
corner studs if drywall is to be installed over the
nailing flange.
USA/Canada: 1-800-STERLING (1-800-783-7546)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.sterlingplumbing.com.
8-11-2015 01:50
Accord
®
60" x 30" Smooth Bath/Shower
71240110