Dimensions Guide

Technical Information
Fixture:*
Bathing well
Basin area 21-1/2″ (54.6 cm) x 46-1/8″ (117.2
cm)
Top area 23″ (58.4 cm) x 51″ (129.5 cm)
To overflow
Water depth 13-1/8″ (33.3 cm)
Capacity 56 gal (211.8 L)
* Approximate measurements for comparison only.
Door maximum width 56-3/4″ (144.1 cm)
Door maximum height 55-7/8″ (141.9 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
30" (76.2 cm)
14" (35.6 cm)
60-1/4" (153 cm) Max
60-1/8" (152.7 cm) Min
4" (10.2 cm)
16" (40.6 cm)
Drain Cutout
1-1/2"
(3.8 cm)
2" (5.1 cm)
D. Drain
9-1/4"
(23.5 cm)
8"
(20.3 cm)
24-1/4"
(61.6 cm)
6" (15.2 cm)
(Typical)
10"
(25.4 cm)
16-1/4"
(41.3 cm)
55-1/4"
(140.3 cm)
75-1/2"
(191.8 cm)
60"
(152.4 cm)
32" (81.3 cm)
20" (50.8 cm)
33-1/4"
(84.5 cm)
33-1/4"
(84.5 cm)
1-1/4"
(3.2 cm)
18"
(45.7 cm)
21"
(53.3 cm)
60"
(152.4 cm)
5-1/2"
(14 cm)
10-1/2"
(26.7 cm)
12-1/2"
(31.8 cm)
3"
(7.6 cm)
17-1/2"
(44.5 cm)
5-1/2"
(14 cm)
6" (15.2 cm) 19" (48.3 cm)
19"
(48.3 cm)
16"
(40.6 cm)
Backer Board Locations
Product Diagram
ACCORDTM
ACCORDTM 60″ (152.4 cm) BATH AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1100765-4-
A