Specification Sheet

Accord
®
60" x 30" bath w/ AIP backerboard
71141116
No image available.
This product is a component and not intended to be a standalone installation.
Technical Information
All product dimensions are nominal.
Installation: Three-wall alcove
Drain location: Left
Maximum door
width:
56-3/4" (1441 mm)
Notes
Install this product according to the installation
instructions.
Product is designed to be used with a single-
hole mixer valve with an escutcheon cover not
to exceed 7-3/4" (197 mm) in width.
Bath cannot be installed without the wall
surround.
Width of back wall at top transitions from
60" (1524 mm) at the front to 59-3/8" (1508
mm) in the back corners. Furring strips
approximately 1/4" (6 mm) thick should be
used at the back corner studs if drywall is to be
installed over the nailing flange.
1-800-STERLING (1-800-783-7546)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.sterlingplumbing.com.
5-29-2021 07:30 - US/CA