Specification

39"
Notes
Technical Information
Measure your actual product for roughing-in
details.
All product dimensions are nominal.
3-Wall AlcoveInstallation:
Install this product according to the installation
guide.
RightDrain location:
46-1/4" x 20-1/2" (1175 mm x 521 mm)Basin area, bottom:
Double studding is recommended for pivot shower
door installations.
52-1/4" x 22-1/2" (1327 mm x 572 mm)Basin area, top:
11" (279 mm)Water depth:
Product is designed to be used with a single-hole
mixer valve with an escutcheon cover not to
exceed 7-3/4" (197 mm) in width.
34 gal (128.7 L)Water capacity:
56-3/4" (1441 mm)Door height required:
56-1/2" (1435 mm)Door width required:
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall
surround.
Width of back wall at the top transitions from 60”
(1524 mm) at the front to 59-3/8” (1508 mm) in
the back corners. Furring strips approximately ¼"
(6 mm) thick should be used at the back corner
studs if drywall is to be installed over the nailing
flange.
ADA compliant when installed to the specific
requirements of these regulations.
USA/Canada: 1-800-STERLING (1-800-783-7546)
www.sterlingplumbing.com
2-18-2015 01:59
60" x 30" ADA Tile Bath/Shower
71140125