Specification

Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″ (1175 mm) x 20-1/2″ (521 mm)
Top area 52-1/4″ (1327 mm) x 22-1/2″ (572 mm)
To overflow:
Water depth 11″ (279 mm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140110
71140120
71240110
71240120
56-3/4″ (1441 mm) 56-1/2″ (1435 mm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″ (197
mm) in width.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
Width of back wall at the top transitions from 60″ (1524 mm)
at the front to 59-3/8″ (1508 mm) in the back corners. Furring
strips approximately 1/4″ (6 mm) thick should be used at the
back corner studs if drywall is to be installed over the nailing
flange.
30" (762 mm)
14" (356 mm)
60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max
4" (102 mm)
16" (406 mm)
Drain Cutout
55"
(1397 mm)
73-1/4"
(1861 mm)
60"
(1524 mm)
30" (762 mm)
17" (432 mm)
3-1/8" (79 mm)
Overflow Detail
22-1/4"
(565 mm)
59-3/8"
(1508 mm)
31-1/4"
(794 mm)
1-1/4"
(32 mm)
15"
(381 mm)
19"
(483 mm)
8"
(203 mm)
6" (152 mm)
(Typical)
31-1/4"
(794 mm)
Ø 2" (51 mm)
Drain
3-1/2"
(89 mm)
10"
(254 mm)
15-1/4"
(387 mm)
8"
(203 mm)
Product Diagram
ACCORD
®
ACCORD
®
60″ (1524 mm) BATH AND WALL SURROUND
Page2of2
1065331-4-
G