Dimensions Guide

Technical Information
Fixture*:
Basin area:
Bathing well 46-1/4″ (117.5 cm) x 20-1/2″ (52.1 cm)
Top area 52-1/4″ (132.7 cm) x 22-1/2″ (57.2 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71140110
71140120
71240110
71240120
56-3/4″ (144.1 cm) 56-1/2″ (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″ (19.7
cm) in width.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
Bath cannot be installed without the wall surround.
Width of back wall at the top transitions from 60″ (152.4 cm)
at the front to 59-3/8″ (150.8 cm) in the back corners. Furring
strips approximately 1/4″ (6 mm) thick should be used at the
back corner studs if drywall is to be installed over the nailing
flange.
30" (76.2 cm)
14" (35.6 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
4" (10.2 cm)
16" (40.6 cm)
Drain Cutout
55"
(139.7 cm)
73-1/4"
(186.1 cm)
60"
(152.4 cm)
30" (76.2 cm)
17" (43.2 cm)
3-1/8" (7.9 cm)
Overflow Detail
22-1/4"
(56.5 cm)
59-3/8"
(150.8 cm)
31-1/4"
(79.4 cm)
1-1/4"
(3.2 cm)
15"
(38.1 cm)
19"
(48.3 cm)
8"
(20.3 cm)
6" (15.2 cm)
(Typical)
31-1/4"
(79.4 cm)
2" (5.1 cm) D.
Drain
3-1/2"
(8.9 cm)
10"
(25.4 cm)
15-1/4"
(38.7 cm)
8"
(20.3 cm)
Product Diagram
ACCORD
®
ACCORD
®
60″ (152.4 cm) BATH AND WALL SURROUND
Page2of2
1065331-4-
F