Specification

3" (76 mm) Drain
Installation NotesTechnical Information
Measure your actual product for roughing-in
details.
All measurements are nominal.
3-Wall AlcoveInstallation:
LeftDrain location:
Install this product according to the installation
guide.
46-1/4" x 20-1/2" (1175 mm x 521 mm)Basin area, bottom:
Double studding is recommended for pivot shower
door installations.
52-1/4" x 22-1/2" (1327 mm x 572 mm)Basin area, top:
11" (279 mm)Water depth:
Product is designed to be used with a single-hole
mixer valve with an escutcheon cover not to
exceed 7-3/4" (197 mm) in width.
34 gal (128.7 L)Water capacity:
56-1/2" (1435 mm)Door height required:
Studs should be positioned roughly as shown.
56-3/4" (1441 mm)Door width required:
Bath cannot be installed without the wall
surround.
The width of the module gets 5/8" (16 mm)
narrower at the back. Furring strips
[approximately 1/4" (6 mm)] should be used at
the back corner studs if the drywall will overlap
the nailing flange.
USA/Canada: 1-800-STERLING (1-800-783-7546)
www.sterlingplumbing.com
6-23-2014 01:00
Accord
®
60" x 30" Tile AFD Bath/Shower
71140112