Manualshelf

Specification Sheet

ManualsBrandsSTERLING ManualsBathEnsemble Tile 33-1/4 in. x 60 in. x 55-1/4 in. Three Piece Direct-to-Stud Tub and Shower Wall Set in White
12
No image available.
Notes
Technical Information
Product is designed to be used with a single-hole
mixer valve with an escutcheon cover not to
exceed 7-3/4" (197 mm) in width.
All product dimensions are nominal.
3-Wall AlcoveInstallation:
70-1/2" (1791 mm)Door height required:
Bath cannot be installed without the wall
surround.
56-5/8" (1438 mm)Door width required:
Width of back wall at top transitions from 60"
(1524 mm) at the front to 59-3/8" (1508 mm) in
the back corners. Furring strips approximately
1/4" (6 mm) thick should be used at the back
corner studs if drywall is to be installed over the
nailing flange.
USA/Canada: 1-800-STERLING (1-800-783-7546)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.sterlingplumbing.com.
8-11-2015 01:25
Ensemble
™
60" x 32" Bath/Shower Wall Set
71124100