Dimensions Guide

Technical Information
Fixture*:
Basin area:
Bathing well 40″ (101.6 cm) x 21″ (53.3 cm)
Top area 52″ (132.1 cm) x 29″ (73.7 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 40 gal (151.4 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7
Model door maximum width door maximum height
76100110
76100120
58″ (147.3 cm) 56″ (142.2 cm)
* Varies with alternative walls.
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding type plug-in cord. Locate
the outlet behind the whirlpool, and within 24″ (61 cm) of the
pump.
Do not disassemble the pump or piping as this could void the
warranty.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown.
60" (152.4 cm) Min
30" (76.2 cm)
4" (10.2 cm)
19" (48.3 cm)
1-1/2" (3.8 cm)
Drain Cutout
3-1/8" (7.9 cm)
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
3-1/2"
(8.9 cm)
8-3/4"
(22.2 cm)
2" (5.1 cm) D.
Drain
17-1/4"
(43.8 cm)
37-1/2"
(95.3 cm)
Pump
Motor
Location
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
16"
(40.6 cm)
8-3/4"
(22.2 cm)
24-1/2"
(62.2 cm)
8"
(20.3 cm)
36"
(91.4 cm)
37-1/2"
(95.3 cm)
1-1/2"
(3.8cm)
Overflow
Detail
53"
(134.6 cm)
73-1/4"
(186.1 cm)
3"
(7.6 cm)
16"
(40.6 cm)
60"
(152.4 cm)
20"
(508 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 36″ (91.4 cm) WHIRLPOOL BATH AND WALL SURROUND
Page2of2
1016911-4-
H