Use and Care Guide

Technical Information
Fixture:* basin area top area
Bathing well 42″ (106.7 cm) x
16-1/4″ (41.3 cm)
56″ (142.2 cm) x
23-3/4″ (60.3 cm)
water depth capacity
To overflow 12″ (33 cm) 34 gals. (128.7 L)
* Approximate measurements for comparison only.
Model door maximum width door maximum
height
71090112/
71090122
58-1/2″ (148.4 cm) 56-1/2″ (143.5 cm)
71091112/
71091122
*58-1/2″ (148.4 cm) * NA
* Varies with alternative walls.
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
3" (7.6 cm)
3" (7.6 cm) Drain
Bottom to Floor
20-1/4"
(51.4 cm)
21-1/4"
(54 cm)
1-1/2"
(3.8 cm)
75-3/4"
(192.4 cm)
54"
(137.2 cm)
31-1/2"
(80 cm)
60" (152.4 cm)
1-1/2" (3.8 cm)
4" (10.2 cm)
60" (152.4 cm) Min.
60-1/8" (152.7 cm) Max.
3-1/2"
(8.9 cm)
2" (5.1 cm)
D. Drain
8-3/4"
(22.2 cm)
8"
(20.3 cm)
22-1/4"
(56.5 cm)
14-1/4"
(36.2 cm)
8"
(20.3 cm)
31-1/2"
(80 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
14"
(35.6 cm)
16"
(40.6 cm)
Recommended Support
Clip or Roofing Nail
Location (5 Total)
30" (76.2 cm)
2" (5.1 cm)
Minimum Drain
Hole Clearance
Through Wall
17-1/4" (43.8 cm)
30"
(76.2 cm)
71090122
Product Diagram
ACCLAIMTM
ACCLAIMTM 60″ (152.4 cm) AFD BATH/SHOWER SYSTEM
Page2of2
1021858-4-
C